Slow getting started this spring

Between the weather and finding time to dig in (pun intended), I have gotten off to a slow start this spring.  The first priority before getting back to the driveway retaining wall was to get some good edging down around the raspberry beds, both to keep the lawn out, and the raspberries in.

Here's what I came up with...

The next priority this spring is getting the raised garden beds put together.  Again, I went with stone.  Surprise!  Here you can see some cement pavers that I will use as a coping for the top edge laid out to check for fit and give me an idea of how much cutting I will need to do.

Once these are mortared in level, I will construct a frame over the bed to support netting, or row cover.

Fountain Head Prototyping

So here is the blank slate that will eventually become the fountain in my stone retaining wall.  I will install a basin at the foot and a smaller basin directly beneath the spout.  I originally planned to just do a bent copper pipe for the spout, but then decided to do something a little fancier.

Out comes the clay for some prototyping.  Here is the progress thus far:

Still needs a lot of refinement.  I will finish the clay model and then pour a silicone mold to create a concrete casting that can then be mounted to the fountain spout.